Table of Contents
Advertisement
Basic Operation —Continued
Selecting Listening Modes
See "About the Listening Modes" on page 56 for
detailed information about the listening modes.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial or optical).
• Listening mode availability depends on the
format of the current input signal.
Selecting on the AV receiver
STEREO
PURE AUDIO
■ [PURE AUDIO] button
This button selects the Pure Audio listening mode.
While this mode is selected, the AV receiver outputs
no video signals and its display is turned off.
■ [STEREO] button
This button selects the Stereo listening mode.
■ LISTENING MODE [
These buttons select all the listening modes that can
be used with the current input source.
Modes can be selected in the following order,
depending on the input signal format:
➔
➔
Pure Audio
Direct
(e.g., PLIIx, Neo:6, Dolby D EX, DTS/DTS 96/24,
➔
DTS-ES, and so on)
54
LISTENING MODE
] [
] buttons
➔
➔
Mono
Stereo
Surround
Onkyo original DSP
Selecting with the Remote Controller
SURR
PURE A
DIRECT
■ [SURR] button
This button selects the Dolby Digital, Pro Logic IIx,
Neo:6, DTS, and other listening modes.
■ [ALL ST] button
This button selects the All Ch Stereo listening mode.
■ [STEREO] button
This button selects the Stereo listening mode.
■ [PURE A] button
This button selects the Pure Audio listening mode.
When this mode is selected, the Pure Audio indicator
lights up, the AV receiver outputs no video signals,
and its display is turned off.
■ [DIRECT] button
This button selects the Direct listening mode.
■ [
DSP] & [DSP
] buttons
These buttons select the Onkyo original DSP modes.
ALL ST
STEREO
DSP
DSP
Advertisement
Table of Contents
