Port Range
Click "Apply" to save the changes, or click "Cancel" to discard the changes. After you have
clicked "Apply", you will see the following message:
Click "Apply" to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click "Continue" to configure other settings.
3‐7‐2 URL Blocking
Use the "URL Blocking" function to prevent computers in the local network from accessing
certain websites.
Item Name
Enable URL Blocking
URL/Keyword
Add
Reset
Click "Apply" to save the changes, or click "Cancel" to discard the changes. After you have
clicked "Apply", you will see the following message:
Input the port number(s) here. The port number can
be a single value, or a range (e.g. "20‐50"). If you need
to input multiple, non‐contiguous port numbers,
separate each number with a comma (",").
Description
Check this box to enable the function.
Input the URL of the website or the keyword
contained in the URL here.
Click "Add" to add the settings to the table.
Click "Reset" to clear all the settings.
68