Table of Contents
Advertisement
Item Name
Enable Static Routing
Destination LAN IP
Subnet Mask
Default Gateway
Hop Count
Interface
Add
Reset
Click "Apply" to save the changes, or click "Cancel" to discard the changes. After you have
clicked "Apply", you will see the following message:
Click "Apply" to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click "Continue" to configure other settings.
3‐7 Firewall
You can configure the firewall functions under "Firewall" to protect your network and
computer.
Description
Check this box to enable the function.
Input the destination LAN IP here.
Input the subnet mask of the destination network
here.
Input the gateway IP address that leads to the
specified network.
Input the hop count (the distance between the
destination network and this broadband router) here.
Select the interface that leads to the destination
network (LAN or WAN).
Click "Add" to add the settings to the table.
Click "Reset" to clear all the settings.
65
Advertisement
Table of Contents
