Idle Time Out
Enable Dual‐WAN
Access
Click "Apply" to save the changes. After you have clicked "Apply", you will see the following
message:
Click "Apply" to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click "Continue" to configure other settings.
3‐2‐4 PPTP
Select "PPTP" if your ISP is providing you Internet access via PPTP (Point‐to‐Point Tunneling
Protocol).
If your ISP is providing you dynamic IP addresses, select "Obtain an IP address
automatically". If your ISP is providing you a static IP address, select "Use the following IP
address".
Specify the amount of time the router waits before shutting
down an idle connection. This option is only available when
"Connect on Demand" is selected.
Check the "Enable Dual‐WAN Access" box if your ISP requires
you to do so.
29