Item Name
Band
ESSID
Site Survey
Wireless Module
Click "Apply" to save the changes, or click "Cancel" to discard the changes. After you have
clicked "Apply", you will see the following message:
Click "Apply" to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click "Continue" to configure other settings.
Description
Select from one of the following options:
2.4GHz (B): Allows 802.11b wireless network clients
to connect to this router.
2.4GHz (N): Allows 802.11n wireless network clients
to connect to this router.
2.4GHz (B+G): Allows 802.11b and 802.11g wireless
network clients to connect to this router.
2.4GHz (G): Allows 802.11g wireless network clients
to connect to this router.
2.4GHz (B+G+N): Allows 802.11b, 802.11g, and
802.11n wireless clients to connect to this router
(recommended).
This is the name of your router. You can type any
alphanumerical character here (maximum 32
characters).
Click "Select Site Survey" and a pop‐up window will
appear. All reachable wireless access points will be
shown in the window. Select a wireless access point
from the list, and click "Done" to establish a
connection. Clicking "Refresh" will renew the list.
Select "Enable" to turn on the 2.4GHz wireless
signal and select "Disable" to turn it off.
41