Table of Contents
Advertisement
Click "Apply" to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click "Continue" to configure other settings.
3‐3 LAN
You can configure your local area network under "LAN".
Refer to the following list for further instructions:
LAN IP
DHCP Server
Static DHCP Leases (See section 3‐3‐3)
3‐3‐1 LAN IP
You can assign the LAN interface's IP address under "LAN IP".
Item Name
IP Address
Subnet Mask
802.1d Spanning Tree
DHCP Server
Lease Time
(See section 3‐3‐1)
(See section 3‐3‐2)
Description
Assign the LAN interface's IP address here.
Please input a subnet mask value for this network.
If you wish to activate the 802.1d spanning tree
function, select "Enabled".
If you wish to activate the DHCP server function,
select "Enabled".
Select a lease time for the DHCP leases here. The
DHCP client will be forced to obtain a new IP address
after the period expires.
You can select "Forever" if you are using this
35
Advertisement
Table of Contents
