Integrated Peripherals - ECS GF8200A Manual

36

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Onboard IDE Controller
OnChip S-ATA Controller
SATA Mode select
AHCI Configuration
Onboard AUDIO Function
Onboard LAN Function
Onboard LAN Boot ROM
Serial Port1 Address
OnBoard IR
USB Controller
Legacy USB Support
< >
OnBoard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
Onboard S-ATA Controller (Enabled)
This item allows you to enable or disable the onboard SATA controller.
SATA Mode select (AHCI Mode)
Use this item to select the mode of the Serial ATA.
AHCI Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
AHCI Settings
AHCI CD/DVD Boot Time out
AHCI Port0
AHCI Port1
AHCI Port2
AHCI Port3
AHCI Port4
AHCI Port5
< >
Press <Esc> to return to the Integrated Peripherals page.
Integrated Peripherals
Enabled
Enabled
AHCI Mode
Press Enter
Enabled
Enabled
Disabled
3F8/IRQ4
Disabled
Enabled
Enabled
: Move Enter : Select
+/-/: Value F10: Save ESC: Exit
F1: General Help
F9: Load Default settings
AHCI Configuration
35
Hard Disk
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
: Move Enter : Select
+/-/: Value F10: Save ESC: Exit
F1: General Help
F9: Load Default settings
Using BIOS
Help Item
Help Item
Some SATA CD/DVD in
AHCI mode need to
wait ready longer.