Pci/Pnp Configuration - ECS GF8200A Manual

PCI / PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
iGPU and Ext-VGA Selection
Init Display First
< > : Move Enter : Select
F1: General Help
iGPU and Ext-VGA Selection (Single)
Use this item to select internal VGA or external VGA card to display.
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Press <Esc> to return to the main menu setting page.
PCI / PnP Setup
Help Item
Single
PCI
Select Internal VGA or
External VGA CARD to
display
+/-/: Value
F10: Save ESC: Exit
F9: Load Default settings
Using BIOS
39