Flying The Ils Approach - Garmin G1000 Manual

13. As the plane crosses the FAF, the destination sequences to the RW09map (RW09, the runway threshold). Keeping the
CDI needle centered, fly toward the MAP, observing the altitude minimums dictated by the approach plate.
14. As the plane approaches the MAP, the waypoint message 'ARRIVING AT WAYPOINT' is displayed.
15. As the plane crosses the MAP, 'SUSP' is displayed above the SUSP softkey, indicating that automatic sequencing of
approach waypoints is suspended at the MAP. A 'FROM' indication is displayed on the CDI, but course guidance along
the final approach course continues. Do NOT follow this extended course. If a missed approach is required, follow
the missed approach procedures as published on the approach plate. Press the SUSP softkey to return to automatic
sequencing of waypoints.
190-00368-03 Rev. A
PROCEDURES
Figure 7 Flying the ILS Approach
Garmin G1000 Pilot's Training Guide 41