Objectives
Upon completion of this lesson, the pilot should be able to locate, use and configure data on the MFD during flight opera-
tions.
Resources
•
G1000 Pilot' s Guide
•
G1000 Cockpit Poster
•
G1000 PC-based Simulator
Exercise 7.1: MFD Configuration and Controls
1. Which main type of data is presented on the default MFD display?
2. What data types can be overlaid on the MFD map? Where are the controls for this data overlay located?
3. Which MFD page group and page must be accessed to verify the status of the two (2) GPS receivers?
4. How are the Nearest (NRST) pages accessed?
5. What types of information can be accessed via the Waypoint (WPT) pages?
6. From which page and via which key can the map display be changed between north-up and track-up presentations?
7. When panning on the Map page, where does information appear about the terrain location over which the cursor arrow
is?
8. Which page should be accessed in order to change the data field options at the top of the MFD display?
9. Which key should be pressed and held for 2 seconds to automatically and quickly return to the Navigation Map page?
14
GROUND LESSONS
Ground Lesson 7
MULTI FUNCTION DISPLAY (MFD) OPERATION
Garmin G1000 Pilot's Training Guide
(exercise continued on next page)
190-00368-03 Rev. A