Table of Contents
Advertisement
2.
Point to the choice that matches the way you have your DVD player
connected
to the TV.
3.
Press MENU or OK to continue.
Setti ng the
SAT/CABLE Channe
I
(auto
tuning)
The next step lets you set the SAT/CABLE channel.
When you set the SAT/
CABLE channel, you're telling
the TV what channel to tune to when you
press the SAT*CABLE button
on the remote.
Indicate which input you used to connect a satellite
receiver or a cable
box. If you don't have a satellite
receiver or cable box connected
to the
TV, skip this step or select Not Connected from the SAT/CABLE Channel
choice list. (For more, see Auto Tuning in the Using the Menus section.)
1.
Press MENU or OK to bring up the SAT/CABLE choice list.
2.
3.
Point to the choice that matches the way you have your satellite
receiver or cable box connected
to the TV.
Press MENU or OK to continue.
If You Have Both a Satellite
Receiver
and a Cable Box
Connected
to the TV
The remote cannot control both a cable
box and the satellite
receiver. If you
choose to have the remote control
the
satellite
receiver, you must then use your
cable box remote to control the cable box
You may, however,
prefer to use the
satellite
receiver remote for satellite
programming,
and set your SAT.CABLE
button
to control
your cable box. It's your
choice.
19
Advertisement
Table of Contents
