Table of Contents
Advertisement
Connections
Setup
Set the Menu
Language
The first part of the setup
allows you to select your preferred
language
for the menu
system.
1. Highlight
your preferred
language
for the menu
system
using the arrow buttons.
2.
Press OK to select that
language
(the Channel
Setup
screen appears
with Auto channel
search highlighted).
Complete
Auto
Channel
Search
This part of the setup allows the TV to search for all channels
viewable
through
your antenna
or cable TV system.
This is sometimes
called auto programming.
Press OK to begin
auto
channel
search.
When the channel
search is complete,
press OK to access the List _ Labels
screen.
Changing
Lists and Labels
The List Et Labels part of the setup lets you edit your channel
list and choose
or create a
personal
six-character
label for each channel.
Note:Changing List and Lat_els can t_etime consuming. Youcan change these at a later time t_yaccessingthe
Setup menu.
1. Press the left or right arrow to scroll through
the available
channels and choose the
channel you want to edit.
2. Press the clown arrow to highlight
the In channellist
option. Press the left or right arrow
button
to add (the box is checked) or remove (the box is unchecked)
the channel from the
list.
3. Press the clown arrow to highlight
the Channel label option. Press the left or right arrow
button
to scroll through
the available list of 25 most common labels. The last option in
the list allows you to create your own six-character
label for the channel (the first letter
of
the label is highlighted).
4. Press the 1 or 2 number button
to change the first letter of the label.
5. Press the right arrow to highlight
the second letter, then press the 1 or 2 number button
to change the second letter, etc...
6. When you are finished creating your label, highlight
60 Back (the Auto Convergence menu
appears).
Auto
Convergence
Your TV's picture
tubes
might
have been
disturbed
during
delivery or after you moved
the TV,
causing
the color in your TV to be out of alignment.
The colors adjust by starting
auto
convergence.
1. Press OK to begin
auto convergence.
2.
When the auto convergence
is complete,
the Red center convergence
menu
appears.
The
cross in the middle
of the screen should
be yellow. If it is not, use the arrow buttons
to
move the red cross to overlap
the green
cross. Press OK when adjustments
are complete.
3.
The Blue eentereonvergenee
menu
appears
with a cyan cross in the middle
of the screen.
If
it is not, use the arrow buttons
to move the blue cross to overlap the green
cross. Press OK
(the TV tunes
to the last available
channel
in the channel
list).
12
Graphics contained
within
this publication
are for representation
only.
Chapter 1
Advertisement
Table of Contents
