Auto Tv/Vcr; Energysaver; Front Panel Brightness (Vcr Display) - GE VG4270 User Manual

Auto TV/VCR
This feature controls whether the TVNCR switch changes
automatically to the VCR mode. Press 3 to switch between ON
and OFF.
Select ON if you want the VCR to switch to the VCR
mode when the VCR is turned on or a cassette is
inserted. This only applies if you connect the IN (FROM
ANT.) and OUT (TO TV) jacks of your VCR to your TV
and watch your VCR on channel 3 or 4 of your TV.
Select OFF if you want the VCR to remain in the TV
mode. This is useful if you watch your VCR on the TV's
video input and you don't want your antenna/cable
signal interrupted by the VCR. Refer to the Connections
section, toward the back of the manual.
Ener Saver
By default, this VCR automatically turns off after two hours of
inactivity. Press 4 to change the time delay, or to disable the
feature.
• OFF: The VCR will remain turned on until you shut it
off.
• 1:00, 2:00, or 3:00: The VCR turns off after one, two, or
three hours of inactivity.
Thirty seconds before shutting off, the VCR will warn you with a
screen reading, "The VCR will turn off in 30 seconds. Press any
key to cancel."
If you use the VCR's tuner instead of your TV to tune channels,
you may want to turn this feature off.
Auto TV/VCR
Pressing TV•VCR will still switch
between the VCR and TV mode.
VCR mode: VCR indicator in the
display panel lights.
TV mode: VCR indicator turns off.
Front Panel Brightness (VCR Display)
You can change the brightness level of the fluorescent display
panel on the front of the VCR. Press 5 to switch between the
options.
• AUTO brightens the display when the VCR is on and
dims the display when the VCR is off.
• BRIGHT keeps the display bright..
• DIM keeps the display at a low brightness level.
17