Table of Contents
Advertisement
The VCR will
only respond
to the compatible
remote's
VCR2,
VCR2,LD,
or VCR2,DVD
button.
If you change
the remote
setting
to VCR2,
the remote
that came
with
your
VCR will
no longer
control
it.
Use the compatible
remote
to change
the remote
setting
back to
VCRI.
Display
the PREFERENCES
menu,
press
1, and then
press
VCR on the VCR's remote.
Auto
Play
This feature
allows the VCR to automatically
start playing when
you insert a tape with the safety tab removed. Press 2 to switch
between ON or OFF.
Select ON if you want a tape with its safety tab removed to
start playing automatically
when the tape is inserted.
Select OFF if you do not want a tape with its safety tab
removed
to start playing
automatically.
Auto TV/VCR
This feature controls
whether
the TV/VCR switch changes
automatically
to the VCR mode. Press 3 to switch between ON
and OFE
Select ON if you want the VCR to switch to the VCR mode
when the VCR is turned on or a cassette is inserted.
This
only applies if you connect the ANT. IN and RF OUT jacks of
your VCR and TV and watch your VCR on channel 3 or 4 of
your TV.
Select OFF if you want the VCR to remain
in the TV mode.
This is useful if you watch your VCR on theTV's video input
and you don't want your antenna/cable
signal interrupted
by
the VCR. Refer to the Connections
section, toward the back
of the manual.
Auto
TV/VCR
Pressing TV,VCR will still switch
between the VCR and TV mode.
VCR mode: VCR indicator in the
display panel lights.
TV mode: VCR indicator turns off.
15
Advertisement
Table of Contents
