GE VG4270 User Manual page 54

Will not record
•
Check to make sure the safety tab is intact.
• Check to make sure the VCR is not in the line mode. Press INPUT on
the remote.
Internal clock shows incorrect time or date
Power interruption. Make sure cable box or VCR is tuned to channel
carrying the XDS information.
Check to make sure the clock is set accurately (check AM/PM and
date).
Check Daylight-Saving setting. The clock may have adjusted for
daylight-saving time.
Time did not adjust for daylight-saving time
• Checkto make sure daylight-saving feature isset correctly.
VCR makes noise when stopped
• VCR is removing tape from heads. This is normal. The head cylinder
inside the VCR will continue to rotate for a few minutes after you
put the VCR in the stop mode.
Will not Auto Channel Search active channels correctly
•
Check to make sure the antenna connections are secureand correct.
Check to make sure the Signai Type: CABLE/ANTENNA feature is set
correctly.
If Detect Automatically was selected for the Signal Type in the AUTO
CHANNEL SEARCH menu, try using either CABLE TV or ANTENNA
instead.
•
May not be necessary if using a cable box for all channels. Contact
your local cable company for more information.
Tape plays back in slow motion
•
PressPLAY to return to normal playback.
Cannot select channels over 69
• Cable channels over 69 can on}y be selected if Signal Type: CABLE/
ANTENNA feature is set to CABLE.
Cassette with safety tab removed does not start to play automatically
• Check to make sure the Auto Play ON/OFF feature is set to ON.
TIMER indicator flashes
•
C_ock is not set.
•
Check to make sure there is a cassette in the VCR when a timer
recording is set.
52