Using The Quickset Guide - GE VG4270 User Manual

Step 5: Tune the TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV's video input.
If you connect your VCR using the IN (FROM ANT.) and
OUT (TO TV) jacks with RF coaxial cable, set the 3 CH 4
switch to channel 3 or channel 4 -- the channel you
want to use on your TV.
If you connect your VCR using the AUDIONIDEO jacks
with audio/video cables, select the TV's video input with
the remote's TV and INPUT buttons to see the signal.
See, "How to Find Your TV's Video Input Channel" in
the References section, for more information about
video line input.
Step 6: Turn on the VCR
Press POWER on the VCR's front panel or VCR on the
remote to turn on the VCR. The first time you turn the VCR
on, a menu screen appears. This is the start of a QuickSet
Guide which helps you pick different options for your VCR.
Step 7: Using the QuickSet Guide
The QuickSet Guide is an automated procedure that helps
set up the VCR. The first time you turn on the VCR, the first
screen of the Guide appears:
Select a Language.
Seleccione un idioma.
ChoJ$issez une langue.
1 English
2 EspafioL
3 Francais
1. Press 1 for English, 2 for Espafiol (Spanish), or 3 for
Fran_ais (French).
The remaining menus throughout the set up will appear in
the chosen language. Just follow the step-by-step
procedure until setup is complete.
(Continued on next page)
VCR Viewing Channel
VCR
_L_ ,_,o_, I
/ / :_0o O_1
e eL_,o ,_o% _
( i" I
/ /
AIV LINE OUTII N Jack5 3 CH4 Switch
When using the IN (FROM ANT.) and
OUT (TO TV) jacks to connect your
VCR, tune your TV to channel 3 or 4.
The 3 CH 4 switch on the back of the
VCR determines which TV channel
is used to see the VCR s output.
When using the AUDIO/VIDEO jacks
to connect your VCR, tune your TV to
the TVs video input channel with the
TV and INPUT buttons on your
remote control. For more information
about video line input, see How to
Find the 7V s Video Input Channel in
the References section of this
manual.
5