Playing Back Audio Only; Copying And Editing Tapes - GE VG4270 User Manual

Playing Back Audio Only
To get stereo sound, con'nect the AUDIO LINE OUT jacks of the
VCR to the appropriate input on your amplifier or receiver. Do
not use the phono input. Refer to your amplifier or receiver
user's guide.
Using Two VCRs for Copying and
Editing Tapes
Use one VCR as the playback VCR and the other as the
recording VCR.
1. Connect the VCRs using the diagram below,
2. Turn on both VCRs and TV.
3. Tune the TVto the VCR viewing channel (either 3, 4, or
TV's video input).
4. If you are using coaxial cables for the connection, tune
recording VCR to channel 3 or 4--the one selected on
the playback VCR.
If you are using audio/video cables, select the line input
on the recording VCR.
5. insert the tape you want to copy into playback VCR.
Insert a blank tape with its safety tab in place into
recording VCR.
6. Using visual search, locate the segment you want to
copy on the playback VCR. Pause the tape at this
location.
7. Press RECORD on the recording VCR, then PAUSE.
8. Press PAUSE on both VCRs to begin copying.
9. Press PAUSE on both VCRs to stop copying.
10. Repeat steps 6-9 to copy or edit additional segments.
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
I Two VCR Connection
CAeLE BOX
// ]1 PLAYBACK VCR /_ L {-- ul__LiNE LiNEAUDIO [ (OtT)l_'_v_ I 1
F_ECO_DIt_G VCB
L _TOTV4-oR.-_TOW
Note that the two VCRS used in the diagram may not took
exactly like the VCR$ you are connecting. The important
thing is to match the proper cable connections. Use the OUT
jacks of the playback VCR to connect to IN jacks of the
recording VCR. R output jacks connect to R INPUT jacks, L
output to L input_ and VJDEO out connects to VIDEO in.
3O