Setting Daylight-Saving Time; Setting Time And Date Manually - GE VG4270 User Manual

Setting Daylight-Saving Time
1. Press MENU to display the VCR MAIN MENU.
2. Press 2 to display the TIME menu.
3. Press 4 to display the SET DAYLIGHT SAVINGS menu.
SET DAYLIGHT SAVINGS
Does
your
area observe
Daylight Savings Time
from April to October?
I Yes, DST is observed
2 No
3>Automatic
Press MENU to continue
4. Select one of the options.
• DST stands for daylight-saving time.
• If you chose Automatic, the VCR sets the clock using the
DST information broadcast in the signal (channel).
VCR
MAIN MENU
Timer Recordings
Time
Channels
TIME
1 Set Time and Date
2 Auto Clock Set: ON
S Set Time Zone
4 Set Daylight Savings
XDS Time Data was
found on channel 20.
O Exit
Setting Time and Date Manually
If the Auto Clock Set was unsuccessful, set the clock through the
menu option. The Auto Clock Set feature isset to OFF
automatically when you set the clock this way.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 Timer Recordings
2 Time
3 ChanneLs
4 Setup
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 2 to display the TIME menu.
TIME
1 Set Time and Date
2 Auto Clock Set: ON
3 Set Time Zone
A Set Daylight Savings
XDS Time Dat8 was
not found
O Exit
3. Press 1 to display the SET TIME AND DATE menu.
Spring Forward; Fall Back
In the Spring, daylight-saving time
begins on the first Sunday in April.
Because the clock automatically
changes from 2 a.m. to 3 a.m.
(forward one hour), remember to
include the extra hour for timer
recording falling within this time
frame.
In the Autumn, daylight-saving time
ends on the last Sunday in October.
The VCR clock automatically changes
from 2:00 AM to 1:00 AM (back one
hour). Therefore, it can affect your
recording length.
14