Timer Recording - GE VG4270 User Manual

Timer Recording
You can set up as many as eight timer recording programs.
1. Press MENU to display the VCR MAIN MENU.
VCR
MAIN
MENU
I
Timer Recordings
2 Time
3 Channels
4 Setup
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 1 to display the TIMER RECORDINGS menu.
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
0 Exit
3. Select 1 to Create a New Program.
How often should this
program record?
1 One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
0 Cancel
4. Select how often you want the program to record.
Program 1 COne time)
Channel --
Start Time --:--
End Time --:--
Start Date --/--I--
Tape Speed SLP
Press MENU to cancel
5. Enterthe data forthe program with the number
buttons.
Timer Recording Information
The Clock must be set correctly.
Insert a tape with the safety tab in
place and enough tape to record
the program.
PROGRAMS OVERLAP appears if you
have entered two programs where
the times overlap.
The TIMER indicator appears in the
display when you turn off the VCR
and a timer recording has been set. It
flashes if there is no tape in the VCR.
When recording from a cable box or
satellite receiver, turn it on and tune
it to the channel you want to record
before the recording is to begin. The
VCR channel should be set to the
cable box's output channel, usually
Channel 3 or 4.
i
27