Table of Contents
Advertisement
The VCR will only respond to the compatible
remote's VCR2,
VCR2oLD, or VCR2°DVD button.
If you change the remote setting
to VCR2, the remote that came with your VCR will no longer
control it.
Use the compatible
remote to change the remote setting back to
VCRI. Display the PREFERENCES menu, press 1, and then press
VCR on the VCR's remote.
Auto Play
This feature allows the VCR to automatically
start playing
when
you insert a tape with the safety tab removed.
Press 2 to switch
between
ON or OFE
Select ON if you want a tape with its safety tab removed
to
start playing
automatically
when the tape is inserted.
Select OFF if you do notwant
a tape with its safety tab
removed
to start playing automatically.
Auto TV/VCR
This feature controls
whether
the TV/VCR switch changes
automatically
to the VCR mode. Press 3 to switch between
ON
and OFF.
Select ON if you want the VCR to switch to the VCR mode
when the VCR is turned on or a cassette is inserted.
This
only appfies if you connect
the IN (FROM ANT.) and OUT (TO
TV) jacks of your VCR.to your TV and watch your VCR on
channel 3 or 4 of your "IV.
Select OFF if you want the VCR to remain in the TV mode.
This is useful if you watch your VCR on the TV's video input
and you don't want your antenna/cable
signal interrupted
by
the VCR. Refer to the Connections
section, toward the back
of the manual.
Auto Play
For a tape to be able to start playing
automatically,
it must have the safety
tab removed. All rented movies and
purchased movies should have this
tab removed.
Auto TV/VCR
Pressing TVoVCR will still switch
between the VCR and TV mode.
VCR mode: VCR indicator in the
display panel lights.
TV mode: VCR indicator turns off.
19
Advertisement
Table of Contents
