Connecting Components To Your Tv - RCA F32444 User Manual

Connections Setup
Conneetino Components to Your TV
for information on using the different jacks on the back of your TV to hook up other components, see the
following pages,
Note: If you prefer, we can provide you with the name of Qn AU thodzed Serwce Representative who will visit your
home for a fee to inst_ll your electronic entertain men t system and to instruct you in its operation. For details
about this service, call 1-888-206-3359 or visit wwv_rca com.
TV (backpanel)
W+ VCR
From Cable
or Aneenna
1. Connect your "iV to your VCR
A. Connect a coaxial cable to the CABLE/ANTENNA jack on your _R/and to the Output Jack on your VCR
(sometimes labeled OUT TOIV},
B. Connect the audio/video cables. Connect audio cables (white and red) to the INPUT1AUDIO R and L
jacks on the back of the lV and to the Audio Output Jacks on the VCR (sometimes labeled OUTR L}.
C. Connect the video cable (yellow) to the INPUT1VIDEOjack on the back of the TVand to the Video
Output Jack on the VCR.
2. Connect cable or antenna to your VCR
Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your VCR
(sometimes labeled IN FROM ANTENNA or IN FROM ANT).
3. Connect the G-LINK cableto the TV
If you haven't already done so, remove the berne Pin from the G-LINK jacl_hen, connect the
G-LINK cable to the G-LINKjack on the _V, Next step, place one of the wands of the G-LINK cable to work
witb your VCR(instructions are on page 5).
Note:if you use the S-videocable to connect another component to the 7_,you must connect the Audio cables
to the INPUT i AUDIOR and Ljacks, not INPUT2
4. Plug in the TV
GO TO PAGE 5
Chapter 1 3