Connecting Other Components - RCA 14M041 User Manual

Connections & Setup

Connecting Other Components

The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of
each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.
The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of
components. The diagrams are intended to show component video and audio interconnections only.
Press the TV/AV selector button to select the AV mode to use the TV as a monitor. Operate your VCR as usual.
TV/AV Selection
AUX
If you connect the TV to a VCR, camcorder or TV game, through the audio/video in jacks, use the TV/AV button
to make your selection. Press the TV/AV button repeatedly to select the desired mode. "AUX" will display on the
screen for 4 seconds.
To Connect the TV to a VCR
VCR
To Audio/Video OUT
To Connect the TV to a TV Game
The TV can also be used as a display device for many video games. However, due to the wide variety of different types of signal generated
by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll
need to consult each component's Owner's Manual for additional information.
To Audio/Video OUT
TV GAME
To Connect the TV to a Camcorder
To playback from the camcorder, connect the camcorder to the TV as shown.
To AV OUT jack
6
Front of TV
VIDEO AUDIO
(not supplied)
Front of TV
(not supplied)
Front of TV
(not supplied)