How To Use Your Tv's Menu System; Audio Menu - RCA F32444 User Manual

How to Use Your TV's Menu System
Use the buttons on the remote or the front of your "W to access the menu system and make changes to the
settings.
Menus
Press MENU on the remote or on the front panel to bring up the Main menu. Note that holding MENU for 2
seconds displays the GUIDE Plus+ system.
Menu choices take you to another menu or a control panel. There are two ways to select a choice in a menu:
Use the arrow buttons on your remote to highlight your choice, and press OK.
Press a number button on the remote. For example, in the Main menu press 3 to go to th_ereen menu.
Exiting a menu
Tbere are tbree ways to exit a menu:
Highlight Exit and press OK.
Press 0 on the remote.
Press CLEAR. The on-screen displays are cleared from the screen and you return to lV viewing.
Audio Menu
Mute PressOK to reduce the TVgvolume to its minimum level.
PressOK again to restore the volume.
Tone ControJs Displays the slider controls for adjusting the
"IV'streble, bassand balance.
Audio Processor Displays a choice list of available audio
modes, which control tbe way the sound comes through your
speakers.You can also accessthe AUDIO PROCESSOR m enu by
pressing the SOUND button on the remote.
Mono Plays the sound in mono onlyNse this setting when receiving broadcasts with weak stereo signals.
Stereo Splits the incoming stereo audio signal into left and right channels. Most TV programs and
recorded materials have stereo audio.
Expanded Stereo Electronically "widens" sound from stereo broadcasts, stereo VCRs, digital satellite
systems, DVD players, and laserdise players for a fullefmore spacious sound.
Sound Logic _ Stereo Reduces the annoying blasts in volume during commercial breaks, and also
amplifies softer sounds in program material. Eliminates the need to constantly adjust volume control.
Second Audio Program [SAP) Plays the program_ audio in a second language, if one is available. The
word SAPappears on the "IV when you tune to a program that is broadcast with SAP information, SAP
audio is broadcast in mono. SAP is also used to broadcast a progrm_'audio with descriptions of the video
for the visually impaired.
Audio Output _ Speakers Displays a choice list that lets you turn the _ internal speakers on or off,
and set the audio outputs to fixed-level or variable control level.
Variable Output, Speakers On This setting turns the TV_ speakers on and allows variable output from
the TVS audio output jacks.
Variable Output, Speakers Off This setting turns the "lV_ speakers off and allows variable output from
the Ms audio output jacks to an external component such as a surround sound amplifier
Fixed Output, Speakers Off This setting turns the W_ speakers off and allows fixed output from the T_'
audio output jacks to an external component such as a surround sound amplifie_Vhen you choose Fixed
Output Off, the W's volume control, tone controls, and mute are disabled.
Chapter 4 21