Table of Contents
Advertisement
Connections
Set p
VCR
f
VIDEO
gUDIO
o°,00
R
RL
or Ant_nfla
TV (back panel)
o
\
TV + DVD + VCR
1.
Connect your DVD Player to your 1V.
A. Connect the audio (white and red) cables to the R and L/MONO AUDIO jacks on the back of the
TV and to the Audio Output jacks on the DVD player.
B,
If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on the DVD
player and to the S-VIDEO [N jack on the back of the _/, If your DVD player doesn't have an
S-Video iack, go to C.
-OR-
C. Connect a video cane {yellow) to the Video Output Jack on the DVD player and to the VIDEO jack
on the back of the _I.
2.
Connect your TV to your VCR
Connect a coaxial cable to the _I ANT jack on your _I and to the Output Jack on your VCR
(sometimes labeled OUT TO IV),
3.
Make sure cable or antenna
is connected
to your VCR.
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR,
Go to page 6
4
Graphics contoined within this publicotion ore for representotion onl_
Chapter
1
Advertisement
Table of Contents
