Table of Contents
Advertisement
Connections
and Setup
_R
TV (back i)ael)
"IV ÷ DVB ÷ VCR
1. Connect your DVD Player to your "IV.
A. Connect the audio {white and red) cables to the VIDEO1 R and LiMONO AUDIOjacks on the back
of the #_ and to the Audio Output jacks on the DVD player (sometimes labeEedL and R).
B. if your DVD pEayerhas an S-Videojack, connect an S-Video cable to the SWideo jack on the DVD
pEayerand to the S-ViDEOjack on the back of the #_. if your DVD player doesn't havean
SWideo jack, go to I D.
-OR-
C, Model 24F530T only: tf wur DVD player has a component video jacks {Y,Pb,Pr},connect video
grade tables to the Component Video jacks on the DVD player and to the Y,Pb, Pr jacks on the
back of the ]V. If your DVDplayer doesn't have component video jacks, go to I D.
-OR-
D. Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the VIDEOjack
on the back of the IV.
2. Connect your Tv'to your VCR
Connect a coaxial cable to the ANTENNAIN jack on your #_ and to the RFOutput jack on wur VCR
(sometimes labeled OUTTOTV).
3. Make sure e_ble or antenna
is connected
to your VCR.
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR
(sometimes labeled in From Antenna),
Note;
If you do not _.'enn_;-ct a cable, antenna, er another ,._mpenent to your 1Y, the T_I will automatically
shut off after 15 minutes to sav_"power.
Dh_nf_r
1
Advertisement
Table of Contents
