Table of Contents
Advertisement
Usin 9 the Remote Control
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE
If programmed,
provides
transport
control for some remote-controllable
VCRs or DVD players,
SEARCH
In VCR mode, accesses Index Search feature.
SPEED
In VCR mode, selects a recording speed.
VCR
Puts the remote in VCR mode and, if auto tuning is enabled, will turn on the
TV and tune to the correct video input channel
ZOOM
In DVD mode, zooms in on the picture.
Using
the INPUT
Button
Use the INPUT button to scroll through
the available video input channels and
view components
you have connected
to the I!/.
1
Make sure the component
you want to view is turned ON.
2.
Press INPUT to tune to an available video input source and view the
component.
3
To return to the previous channel, continue
pressing IN PUT.
VCR buttons
REVERSE /
and PLAY
buttons
_
_
D _
ON,OFF
Programming the Remote to Operate Other
Components
The universal remote can be programmed
to operate most
brands of remote controllable
components. The remote is
already programmed
to operate most RCA, GE, and Prosean
components.
Nole TheTVbutton con'l beprogrdrnmcd on ibis remolc
Find Out
If You Need to Program
the Remote
To determine
whether the universal remote needs to be
programmed for your component,
turn the component
ON.
For example, to program the remote for a VCR, turn on the
VCR. Point the remote at the VCR, and press the VCR button.
Then press ONoOFF or CH t- {channel up) or CH - {channel
down) to see if the VCR responds to the remote commands. If
the component
does not respond, the remote needs to be
programmed.
Programming
the Remote
STOP
button
There are two ways to program the remote eontroh
You'll use these butto_ls whell
programming file remote.
•
automatic
code search
•
direct entry
Chapter
2
Graphics contained
within this publication
are for representation
onl}4
9
Advertisement
Table of Contents
