Table of Contents
Advertisement
Channel Banner
There are several items that might appear on-screen when
you press the I!/or
INFO button on the remote, This display is
called the Channd
Bannen The following
list describes the
items on the Channel Banner screen (left to right and top to
bottom),
SAP
KidPass: 2:24
CC
Stereo or Mono
Skip: 0:30
07:18em
06 ABCDEF
Displayed when the current channel
is broadcasting
SAP {Second Audio
Program) information,
Displayed when V-Chip has been
activated.
Displayed when KidPassis set and the
length of time remaining.
Displayed when Closed Captioning is
available on the current channel.
Stereo displayed when the current
channel is broadcasting
in stereo,
Mono displayed when the current
channel is broadcasting
in mono.
Corresponds to the SKIP button.
Shows the amount of time left before
the ]V switches back to the previous
channel,
Displays the current time.
Displays the current channel and
label assigned to the channel.
Displayed when you mute the sound
Why You Should Use the Auto Tuning Feature
The auto tuning feature tunes the ]V to the correct channel for different
components
you have connected
to your _/{like
a VCR, DVD Player, etc.}. When
you set up auto tuning in the menu system you don't have to remember to change
your R/to
channel 3, for example, when you want to watch the tape in your VCR,
How to Set Up the Auto Tuning Feature
The way you set up the auto tuning feature in the ]!!'s menu corresponds to the
component
buttons on the remote and the way you have each component
connected
to your _/. When you set up auto tuning, you're telling the I1/what
channel to tune to when you press the VCR or DVD button on the remote control.
1, Press MENU (the MAIN MENUappears},
2,
Highlight
Setup and press OK on your remote control.
3
Highlight
Auto Tuning and press OK.
Chapter 3
Graphics contained
within this publication
are for representation
onl}4
1 3
Advertisement
Table of Contents
