Tv + Dvd + Vcr - RCA 27V550 User Manual

Connections
Setup
VCR
TV(backpanel)
TV + DVD + VCR
* If you connect an S-Video cable, you must connect
the audio cables to the VIDEO I AUDIO jacks on the
back of the TV,not the VIDEO2 AUDIO jacks.
I. Connect your DVD Player to your"IV.
A. Connect the audio {white and red) cables to the VIDEO2 R and L/MONOAUDIOjacks on the back
of the IV and to the Audio Output jacks on the DVD player.
B. ff your DVD player has Component Output Jacks{Y,Pb, Pr),connect three video grade cables to
the Y,Pb, Pr jacks on the DVD player and to the VIDEO2 Y,Pb, Pr jacks on the back of the lV. If
your DVDplayer doesn't haveY, Pb, Pr jacks, go to C.
-OR-
C. If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on the DVD
player and to the S-VIDEO IN jack on the back of the TV. If your DVD player doesn't have an
S-Video jack, go to D.
Note:If you connectan S-Video cable,you must connect the audio cables to the VIDEO1AUDIOjacks on the beckof the
P_, n ot the VIDEO 2 AUDIOjacks.
lOR-
D,
Connect a video eable (yellow) to the Video Output Jack on the DVD player and to the VIDEO 2
VIDEO jack on the back of the IV.
2. Connect your IV to your VCR
Connect a coaxial cable to the IV ANTjack on your IV and to the Output Jack on your VCR
(sometimeslabeled OUTTOIV).
Note.' l f your VCRhos A/V output jocks, you can connect your lV to your VCRusingaudio/video cablesfor better quality
3. Make sure cable or antenna is connected to your VCR.
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR.
Go to page 7
4 Graphics contained within this publication are for representation onl)_
Chapter 1