Table of Contents
Advertisement
Connections
Setup
Front Panel Buttons
If you cannot locate your remote, you can use the front panel buttons of your TV
to operate many of the _/'s features.
MENU/OK
Brings up the Main menu. In the menu system, it selects highlighted
items.
CH-
Scans down through the current channel list. In the menu system, acts like
the down arrow button on the remote control and adjusts menu controls.
CH+
Scans up through
the channel list. In the menu system, acts like the up
arrow button
on the remote control and adjusts menu controls.
VOL-
Decreases the volume. In the menu system, acts like the left arrow button
on the remote control and adjusts menu controls.
VOL+
Increases the volume. In the menu system, acts like the right arrow button
on the remote control and adjusts menu controls.
POWER
Turns the I_ on and off
Plug in the TV
Plug the end of the power cord into a grounded wall outlet. Insert the plug
completely into the outlet.
Put batteries in the remote
•
Remove the battery compartment
cover from the back of the remote by
pushing down on and sliding off the cover.
•
Insert 2 "AAA" fresh batteries, Make sure the polarities
{+ and -) are aligned
correctly.
•
Replace the cover.
/
Arrows
OK
button
How to Use the Remote Control to Complete
the Initial Setup
The technical
term is "Navigation"-
how you move through
the on-screen menus, The method is the same throughout
the menu screens: highlight
your choice and select it,
To highlight
a menu item, press the arrow buttons on the
remote to highlight
one of the items listed on the screen.
Use the up or down arrow button
to move up or down. Use
the right or left arrow button
to move right or left.
To select the item that you've highlighted,
press OK.
Note H_ghlighledmeans lhat the menu _tern slands out from olher
menu items on theI_sl ¸ _ppears darker,brighl_r, or _ differenl ¸color}¸
6
Graphics contained
within this pu61ication ere for representation
only
Chapter 1
Advertisement
Table of Contents
