Table of Contents
Advertisement
USING
THE REMOTE
MENU
Brings up the Main menu and selects highlighted items. When
in VCR mode, it functions as a PROGRAM button.
CLEAR Removes any menu or display from the screen and returns you
to TV viewing. Will also exit the Guide system.
(0-9) Number Buttons
Enters channel numbers and time settings
directly though the remote control. To enter a two-digit channel, press
the two digits. To enter a three-digit channel, press and hold the first
digit until #-- appears, then add the second two. Example: to tune to
channel 123, press and hold 1 until 1-- appears then press 2 and 3.
WHO-INPUT
In TV mode, press to toggle through the available
input sources (VID1/SVID1, VID2/SVID2, previous channel). In SAT
mode, press to select available channel lists.
ANTENNA
Functions as TV/VCR button in VCR mode and TV/
receiver button in SAT.CABLE mode.
REVERSE,PLAY,FORWARD, RECORD, STOP, PAUSE If programmed,
provides transport control for some remote-controllable
VCRs, DVD
players, laserdisc players, tape decks, and CD players. Pressing
RECORD when using the GUIDE Plus+ system sets the VCR to record
a program.
PIP Brings up the small picture-in-picture
window. Press again to
remove the PIP window. When PIP Caption Display - Alternate with
PIP - has been selected, will display captioning in the PIP window.
SWAP Swaps the main picture with the PIP window.
CH CTRL Selects the picture window, (that is, the main or PIP
window) to be changed by the CH A (channel up) or CH v (channel
down) buttons.
RESET Resets picture quality controls to the Bright Lighting Picture"
Control Preset. Point and select to choose a different Picture Control
Preset.
USING THEWHO°INPUT
BUTTON
Use the WHO°INPUT
button
to scroll through
the available
input
channels
and view components
you have connected
to the TV.
1.
Press TV to place the remote in TV mode. Make sure that the
component
you want to view is turned ON.
2.
Press WHO°INPUT
to tune to an available
input channel.
3.
Continue
to press the WHO-INPUT
button to scroll through
the
channels.
Modes
of Operation
Because this universal
remote can
control
several different
components
(DVD
player, VCR, Cable Box, etc.) it
uses operational
modes triggered
by the
component
buttons.
For example
if you
want the remote to control
the TV, you
would
press the TV button to put the
remote into TV mode before you could
control
the TV.
21
Advertisement
Table of Contents
