Table of Contents
Advertisement
SETUP AND CONNECTIONS
STEP 4:
PLUG IN THETV
Hug the end into the wall outlet, matching the wide blade of the plug
with the wide slot in the outlet. Be sure to insert the plug completely.
STEP 5:
PLACE
BATTERIES IN REMOTE
Remove the battery compartment
cover from the back of the
remote.
Insert fresh batteries. Make sure that the polarities (+ and -) are
aligned correctly.
Replace the cover.
STEP6:TURN
ON THETV
Press TV on the remote, or press POWER on the TV itself.
Pressing the TV button not only turns on the TV, but puts the remote
into TV mode, so that the buttons on the remote will control TV
functions.
ON-SCREEN
PROGRAM GUIDE
/
The TV is designed to bring up the GUIDE Plus+ on-screen program
guide when you use the TV button on the remote to turn on the TV
(after you have set up the GUIDE Plus+ system). For more information,
see the GUIDE Plus+ Features & Setup bookl_'t.
To
GET OUT OF THE GUIDE:
•
Press OK exit the Guide and tune to the highlighted channel.
•
Press GUI DE to exit the Guide and tune to the channel displayed
in the View window.
•
Pr_'ssCLEAR to exit the guide and go to the last channel you were
watching.
STEP
7:
PROGRAM THETV
Proceed to the next section, Interactive Setup. The interactive setup
routine walks you through the steps needed to fully configure the TV.
The first steps ask you to select your preferr_,d language for the menu
system and to begin the auto channel search, which puts available
cable TV or antenna signals into the TV's memory.
Projection
TV Only.
If the picture appears to have a double or
triple image or if you notice
rings or halos
around objects,
you may have to adjust
the color convergence.
Details can be
found under the Screen menu heading
in
the Features and Menus section of this
manual.
10
Advertisement
Table of Contents
