Remotebuttons - ProScan PS27600YX1AL4 User Manual

USING THE REMOTE
REMOTEBUTTONS
ON-OFF When in TV mode, turns TV on and off. If in another device
mode (VCR, DVD, Satellite, etc.) and programmed, will turn the
device on and off. When pressed twice within two seconds all devices
that ar_ on will be turned off (this feature only works with most
ProScan, RCA and GE products).
VCR1 Puts the remote in VCR mode and if autotuning is enabled, it
will turn on the TV and tune to the correct channel.
TV Turns on the TV and puts the r_rnote in TV mode. Also displays
channel information.
DVD Puts the r_mote in DVD mode and if autotuning is enabled, it
will turn on the TV and tune to the correct channel.
VCR2 Puts the remote in VCR2 mode and if autotuning is enabled, it
will turn on the TV and tune to the correct channel.
LED Red light which indicates programrning rnode when programming
the remote.
AUX Puts the r_mote in AUX mode. Also turns on the TV.
SAT-CABLE Puts the r_'mote in SAT.CABLE mode and if autotuning is
enabled, it will turn on the TV and tune to the correct channeh
MUTE Reduces the TV's volume to its minimum level. Press again to
restore the volume.
SKIP Press once before" changing channels and the TV will wait 30
seconds before returning you to the original channel. Press repeatedly
to add more time.
CH ^ or CH v Scans up or down through the curr_nt channel list.
Press once to change the channel up or down; press and hold to
continue changing channels.
VOL - or VOL + Decreases or increases the TV's w)lurne.
SOUND Press once to display the audio processor choice list. Point
and select to choose a different processor or press CLEAR to exit.
GO BACK Returns you to the previous channeh
(_ Press to illuminate the r_Tnote buttons. The light automatically
shuts off within a few seconds of the last button press.
GUIDE Brings up GUIDE Plus+ system and exits the Guide. In
SAT.CABLE mode brings up available on-screen guides.
INFO Brings up channel information.
MOVE (Arrows) Used to point to different items in the menu system.
Also used to adjust the menu controls. Also move the PiP window
when no menus are on the screen.
OK When in the menu system, selects highlighted items or returns you
to the previous menu.
1]£)
VCRI TV
DVD VCR2 AUX SAT. CABLE
&&'&&
MUTE SKIP
SOUND _ GO BACK
GUIDE INFO
MENU CLEAR
,@2@3@
4@ 5@ 6@
,@ 8@9@
WHO'INPUT ANTENNA
®o@
REVERSE PLAY FORWARD
<3
RECORD STOP PAUSE
PIP SWAP CH CTRL RESET
OOOO
2{}