Programming The Simple Remote - ProScan PS32130 User Manual

PROGRAMMING THE SIMPLE REMOTE
There are two methods to program the simple remote's VCR button:
CODE SEARCH and DIRECT ENTRY. The simple remote's TV button is
already programmed for your TV.
To program the VCR button using CODE SEARCH
1. Make sure the VCR is turned off unless it is a GE, PROSCAN, or
RCA producL If the VCR is a GE, PROSCAN or RCA product, turn
it on.
2. Press the VCR button and the POWER button simultaneously.
3. Release the two buttons.
4. Pressthe POWER button repeatedly until the VCR turns ON.
5. Press the CHAN DN button to verify the code. If the channel
changes on the VCR, the code is valid. Press MENU to complete
the search.
To program the VCR button using DIRECT ENTRY
1. Find the keypress combination for your VCR by locating your
brand of VCR in the VCR Codes table on the next page.
2. Note the code numbers that follow your brand of VCR.
3. Locate the code number in the Key Combination chart on the
next page.
4. Press and hold the VCR button.
5. Enter th_four keypresses shown in the Key Combination Chart.
28