ProScan PS32130 User Manual page 40

SIGNAl. SOURCE Provides connection to a home antenna or cable
TV system.
FIXED OUTPUT Provides fixed-level audio and video output from the
IV. These output signals are ideal for connecting to an AN receiver or
amplifier that has its own remote control. The FIXED OUTPUT jacks
are also suitable or for recording from the TV with a VCR, camcorder,
or tape deck.
HI-FI OUTPUT Provides volume-controlled stereo audio output,
meaning the volume changes as you change volume on the TV. The
HI-FI OUTPUT jacks are ideal for connecting the TV to an amplifier
that does not have its own volume control or remote.
SPEAKERSWITCH Lets you turn off the TV's internal (built-in)
speakers and play the audio through external speakers connected to
the TV. Set SPEAKERSWITCH to EXTERNAL to play audio through
external speakers. Set the switch to INTERNAL to play audio through
the TV's internal (built-in) speakers
REAR SPEAKERSThe REAR SPEAKERS terminals let you connect rear
speakers to the TV.
FRONT SPEAKERSThe FRONT SPEAKERSterminals let you connect
front external speakers to the TV.
POLARITY SWITCH (31" screen size or above only) Your TV has an
extra-large (31" or above) color picture, which makes it vulnerable to
the effects of the Earth's magnetic field. You may need to reset the
POLARITY switch and STRENGTH switches if you reposition the TV or
move it to a different room.
If you notice th'_ picture tilting slightly, follow these steps to correct
the tilt:
1. Makte sure the STRENGTH switch is set to OFF.
2. Move the STRENGTH switch to LOW. If the picture gets better, but
not quite perfect, move the switch to HIGH.
3. If the picture gets worse, change the position of the POLARITY
switch. If the picture improves, but is not quite perfect, move the
STRENGTH switch to HIGH.
Remember to set the speaker switch
back to INTERNAL when you are not
using the external speakers.
To connect a subwoofer to theTV,
use the left (L/MONO) HI-FI-OUT-
PUT jack.
37