Set The Vcr1 Channel - ProScan PS32130 User Manual

SET THE VCR 1 CHANNEL
The fourth step lets you set the VCR1 channel. When you set the VCR1
channel, you're telling the TV what channel to tune to when you press
the VCR1 button on the remote.
For example, if you have a VCR connected to the Video 1 input jacks
on the back of the TV, you want the TV to tune to the Video 1 input
channel when you press the VCR1 button. If you don't have a VCR1
component connected to the TV, skip this step or select Not Connected
from VCR1 Channel choice list. (For more, see Auto Tuning, page 45.)
1. Press MENU to bring up the VCR 1 choice list.
2,
Point to the choice that matches the way you have your VCR
connected to the TV.
If you used the Connections Foldout to hook up your TV, use the
table shown at the right to select the VCR1 channel.
3. Press MENU to continue.
19