Table of Contents
Advertisement
Basic
TV
Operation
PIP (Picture-in-Picture)
Operation
The PIP (Picture-In-Picture)
feature lets you display a second, smaller analog (NTSC
fromat) picture on top of the main analog picture.
Your TV is equipped
with a dual NTSC tuner that tunes to cable or off-air television
signals. You will only be able to use the PIP window and main picture with analog
channels.
r
Note that you will only be
able to use PIPwith
analog channels.
PIP Buttons
There are certain remote buttons that control the way the PIP window works:
PIP Brings up the PIP window.
Press PIP again to remove the window.
Arrows
Let you move the PIP window to different areas of the screen.
SWAP Switches, or "swaps," the video from the PIP window with the main picture.
CH CTRL (Channel
Control)
Lets you switch channel control between the PIP window
and the main picture. To determine
whether you are controlling
the PIP or the main
picture, look at the channel banner as you change channels. The triangular indicator is
beside the channel number for the picture you're controlling.
Main
picture
channel
number
Channel
PIP channel
control
number
indicator
Using
the PIP Feature
While you may use PIP in different ways, this basic PIP scenario should get you started.
When watching an analog channel,
lk)llow these steps.
1
Press the PIP hutton on the remote control. The PlP window appears on the screen.
2.
lJsc the channel
up and down or digit buttons to change tile PIP channel.
3
To change the program
in the lnam picture window,
press CH CTRL. Then use the
challt+lel
tip and
down
or digit
buttons.
To go hack and forth hetwecn
controlling
the PiP window and the main picture, press tile
CH CTRL button.
Arrow
PIP _
but_ns
_o
ol'.O
,0 _0 _0
'0 o0 o0
'0 '0 o0
• oO i-
30
Chapter
3
Advertisement
Table of Contents
