Table of Contents
Advertisement
Using the TV's Features
Input 1 Component is connected to the Input 1 Video (V) or S-VIDEO jack on the back of the TV and you want
the TV to tune to the Video Input Channel when you press the corresponding button.
Input 2 Compatible video source, such as a DVD player or satellite receiver, is connected to the Input 2
COMPONENT/COMPOSITE INPUT jacks (Y/Video, Pb, Pr) on the back of the TV and you want the TV to tune to
the composite/component video input when you press the corresponding button.
Front Input Component is connected to the S-VIDEO IN or VIDEO IN jack on the front of the TV and you want the
TV to tune to the front Video Input Channel when you press the corresponding button.
HDMI/DVI Component is connected to the HDMI/DVI jack on the back of the TV and you want the TV to
tune to this input when you press the corresponding button.
PIP (Picture-in-Picture) Operation
The PIP (Picture-In-Picture) feature lets you display a second, smaller analog (NTSC format) picture on top of
the main analog picture. You will only be able to use the PIP window and main picture with analog channels
and inputs; PIP doesn't support digital signals. The main and PIP channels must be from different tuners; you
must have the main picture from CABLE INPUT and the PIP picture from ANTENNA INPUT, or vice-versa.
CLEAR
Arrow
buttons
FORMAT
PIP
buttons
INPUT
REVERSE
RECORD
PIP
Tip
If you want to go directly to an input or channel in PIP
(or main), set up auto tuning and press the component
button (AUX orDVD).
38
MENU
OK
OK
SKIP
FREEZE
INFO
GUIDE
1
2
3
4
5
6
7
8
9
ANT•CAB
0
FORWARD
PLAY
STOP
PAUSE
SWAP
CH CTRL
PIP Buttons
There are certain remote buttons that control the way the PIP window
works:
PIP Brings up the PIP window. Press PIP again to remove the window.
Arrows Let you move the PIP window to different areas of the screen.
SWAP Switches the video from the PIP window to the main picture.
FREEZE Freezes entire screen, including the main picture and PIP
window, if PIP is displayed.
CH CTRL (Channel Control) Lets you switch channel control between
the PIP window and the main picture. To determine whether you are
controlling the PIP or the main picture, look at the channel banner as you
change channels or press INFO button. The triangular indicator ( ) beside
the channel number lets you know which picture you're controlling with
channel up/down, number buttons, etc.
Using the PIP Feature
The PIP feature is only available for analog (NTSC) channels; PIP won't
work when tuned to a digital (ATSC) channel. Use the channel banner to
determine whether a channel is digital or analog. A digital (ATSC) channel
has a dash and second number after it (e.g., 21-2); an analog channel
doesn't (e.g., Ch 21). While you may use PIP in different ways, this basic
PIP scenario should get you started. When watching an analog channel,
follow these steps.
1. Press the PIP button on the remote control. The PIP window appears
on the screen and Channel Control is automatically set to the PIP
window.
Chapter 3
Advertisement
Table of Contents
