Antenna With A Single Lead; Antennas With Separate Uhf And Vhf Leads - Mitsubishi Electric DLP WD-52631 Owner's Manual

Chapter 2. TV Connections 27
Antenna with a Single Lead
A. For an antenna with fiat twin leads
A 300-ohm-to-75-ohm transformer is required, This is not
included with the TV, but is available at most electronics
stores.
A1. For an antenna with flat twin leads, connect the 300-
ohm twin leads to the 300-ohm-to-75-ohm trans-
former.
A2. Push the 75-ohm side of the transformer onto ANT 1
on the TV back panel.
B. For cable or antenna with coaxial lead
Connect the coaxial lead directly to ANT 1 on the TV
back panel,
Optional 300-Ohm-
to-75-Ohm
Matching Transformer
Figure Z Connecting a Single Antenna
Antennas with Separate UHF and
VHF Leads
Required: UHF/VHF combiner
This is not included with the TV, but is available at most
electronics stores,
1, Connect the UHF and VHF antenna leads to the UHF/
VHF combiner,
2, Push the combiner onto ANT 1/MA|N on the TV
back panel,
VHF Antenna UHF Antenna
(Channels 2-13) (Channels 14-69)
-- Fiat Twin Lead_
External
Antenna
or Cable
[ 3%°o%t°-
ornbiner 2,
i Baek Side
View View
1.
TV back panel
To ANT 1/IVIAiN
ANT 1/MAI[_ i
Figure 8. Connecting separate UHF and VHF Antennas