Tv Back Panel - Mitsubishi Electric DLP WD-52631 Owner's Manual

18 Chapter 1. Television Overview
TV Back Panel
ANT2 / AUX
ANT1 I MAIN
/
ANT 1
on WD-52631
@@
H :3m|
HDMI COMPATIBILITY
VIDEO: 480V480c 720cJ1080i/1 OS0c
ANT 1/MAIN
1. ANT l/MAIN, ANT 2/AUX (Antenna)
If you are connecting an antenna, direct cable without
a cable box, or are using cable with a CableCARD
TM,
connect the main antenna or cable source to
ANT l/MAIN.
ANT 1/iVlAIN and ANT 2/AUX can each receive both
digital and analog over-the-air channels from a VHF/UHF
antenna or non-scrambled digital/analog cable source.
ANT l/MAIN and CableCARD
TM
(models WD=57731 and
WD-65731)
Use ANT l/MAIN to receive premium subscription cable
TV service authorized by the CableCARD
TM
access card.
The CableCARD access card is provided by your local
cable company. ANT 2/AUX can continue to receive
over-the-air or non-scrambled cable signals when ANT 1
is used for CableCARD
TM
service.
2. CabieCARD
TM
Slot
(models WD=57731 and WD=65731)
The CableCARD access card from your cable TV service
provider is inserted into this slot. When inserting, ensure
that the top of the card faces in the direction indicated by
CARD TOP A.
If your cable company is not currently offering CableCARD
access cards, use the cable box provided and authorized
by your local cable company to view scrambled channels.
3. iNPUT 1 and 2 inputs
(Audio and Video)
iNPUT 1 and 2 can be used to connect a VCR, Super
VHS (S-VHS) VCR, DVD player, standard satellite receiver,
or other A/V device to the TV. INPUT 3 is a third set
of jacks located on or near the front of the TV for conve-
nience. Please note that if S=VIDEO and VIDEO are
both available, you must choose to connect only one.