Setupmenu; Setup Menu - Mitsubishi Electric DLP WD-52631 Owner's Manual

46 Chapter 4. TV Menu Settings
Setup Menu
Figure 2. Setup menu
channels from memory, naming channels, and saving
favorite channels in custom memory banks.
Note: If using a CableCARD
TM,
the complete list of
available channels is provided through the
CableCARD and the ANT 1 option is grayed out.
Clock (Setup Menu)
Set the clock if you wish to use the TV's Timer function
or schedule delayed recordings. You can use either the
manual or auto method to set the clock.
Language (Setup Menu)
Choose to display the on-screen menus in either English
or Spanish (EspaEol).
To listen to audio in other languages (when available), see
the "Audio Settings" section in this chapter and refer to
"SAP" (analog signal) or "Language" (digital signal).
Memorize Channels (Setup Menu)
For ANT l/MAIN and ANT 2/AUX
The memorization process performs two scans of all
possible channels on the selected ANT input. Analog
channels are scanned first, then the process is repeated
for digital channels. Channel memorization may take up
to 15 minutes to complete.
To start channel memorization
1. Highlight an input selection based on your connec-
tions:
Ant 1 Air, When connected to an indoor/outdoor
Ant 2 Air antenna
Ant 2 Cable cable box)
2. Press ENTER to start automatic channel memorization.
To stop channel memorization before completion
Press CANCEL.
Channels memorized before you pressed CANCEL are
retained in memory. If you restart memorization, all previ-
ously memorized channels for the selected antenna input
are erased and the process starts over from the begin-
ning.
After channel memorization, press OH/_/V to tune
to memorized channels. Select the Channel menu for
further channel editing, such as adding and deleting
Figure 3. Clock submenu
Setting the Clock Manually
Time
With the hour highlighted in yellow characters, press A Y
repeatedly to slowly increment the hour and associated
AM/PM indicator or press and hold to quickly increment
the hour. Press ENTER to highlight the minutes in yellow.
Press A Y to set the minutes.
Date
With the month highlighted in yellow characters, press
A Y to select the correct month. Press ENTER to highlight
the day. Press A V to select the correct day. Press ENTER
to highlight the year. Press ,& Y to select the current
year.
Time Zone
Select your correct time zone. Press A or Y to select
the time zone for your area (Atlantic, Eastern, Central,
Mountain, Pacific, Alaska or Hawaii). Press _ to move
to the Daylight Savings option.
Daylight Savings
Press A or V to select either Applies or ignore, depend-
ing on whether or not daylight savings time is in effect.
This setting is used by ChannelView for channel listings
and does not cause the TV's clock to adjust to daylight
savings time; you must manually set the TV's clock
ahead or back each time the time change occurs.
Setting the Clock Automatically
Select the Time Zone and the Daylight Savings (DST)
options for your state. Press A V to select Applies or
Ignore. You may then tune to a channel on ANT 1 or