Choosing A Program Source; Channelview; Channel Listings - Mitsubishi Electric DLP WD-52631 Owner's Manual

Dlp projection television
Hide thumbs Also See for DLP WD-52631:
Table of Contents

Advertisement

36
Chapter
3. TV Operation
Choosing a Program Source
NOTE: If your only viewing sources are connected to the
ANT
1 and ANT 2 antenna jacks, you can switch
inputs without the Input Selection menu. Press
INPUT t o switch between ANT
1 and ANT 2. To
verify which is the current source while watching
TV, press INF0 to see the on-screen status display.
Selecting
from Multiple
Sources:
The input
Selection
Menu
The Input Selection menu allows you to select an input to
watch on the TV. The current input appears as a gold-
colored icon.
1.
Press INPUT o n the TV's remote control to display the
Input Selection menu (Figure 2).
2.
To select a different input, press A Y 4 _ on the TV's
remote control to move the highlight through icons in
the input section.
3.
Press ENTER to switch to the device and close the menu.
More About the input Selection
Menu
To assign meaningful labels to the icons, such as
"VCR" or "DVD," see the "Input Name" section of
chapter 4, "TV Menu Settings."
To rearrange the icons, see the "Icon Order" section of
chapter 4, "TV Menu Settings."
To use with IEEE 1394 devices, see additional informa-
tion in chapter 7, "Using IEEE 1394 Devices."
ChanneIView
TM
Channel Listings
ChannelView provides listings, as sent by the broadcast-
ers, for memorized channels on ANT 1 or ANT 2. Digital
channels are indicated with a "D" and analog channels
with an "A." Digital channels are shown with the major
channel and sub-channels
(or bitstreams).
Analog
channel information is displayed as sent.
Note:
If limited data is shown or no program data ap-
pears, it is because the broadcaster is not sending
the information.
This is not a defect of your TV.
ChannelView
channels one by one.
Scan quickly through memo-
Press PAGE A/V.
dzed channels. ...............
...............
View de{aiied infoima{ion foi
Piess A or Y io highiighi
digital channels,
a channel and press I_.
Figure 3. ChannelView screen, current programs.
Use
to exchange displays for current and future programs.
Figure 2. Input Selection menu
Figure 4. ChannelView screen, future programs on the
selected channel (digital channels only)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dlp wd-65731Dlp wd-57731

Table of Contents