Split Screen - Mitsubishi Electric DLP WD-52631 Owner's Manual

40 Chapter 3. TV Operation
Split Screen
Split Screen allows you to view pictures from two different
sources at the same time. Split Screen is available when
you have video sources connected to the TV in addition to
any connections to ANT 1 and ANT 2.
Operation
Turn Split Screen on or off
and sub-pictures.
Check which picture is the sound source.
cate the sound source, i
1. Press l_ to make the sub-picture the sound source.
2. Press INPUT a nd move the highlight to the icon for the input you wish
to view as the sub-picture (see figure 5).
Change the source of the sub-picture. 3. Press ENTER to make the change.
Grayed-out input icons are unavailable as Split Screen sources or with
the current source.
Change channels (when the input source is
ANT 1 or ANT 2). • With the main picture as the sound source, enter the channel
number and press ENTER.
Change ihe size of ihe main and sub_pic- Repeaiediy press FORMAT io cycie ihrough piciure siZes See the ioiiow-
tures, ing page for sample displays.
........... 1. Press _, to make the sub-picture the sound source.
WlaKe
me sub picture Till me screen. .........
z. _'ress SPLIT t o close bplk bcreen mode.
"SPLIT" appears under the
Video icon to distinguish
this menu from the input
Selection menu.
Choice of Split Screen
sub=Picture Sources
iMPORTANT
}plit Screen is unavailable if:
i Your only inputs are ANT 1 and ANT 2.
Either picture source is a 1080p signal from
an HDMi jack.
Either picture source is from a personal
computer.
Figure 5. Change the source of the sub-picture with the
Split Screen Input Selection menu.