Advertisement
Part I1: Installation
Connecting a VCR
TV_ckp_l
Antennas
or Wall Outlet Cable
(Figure 1)
[]
Connect
the incoming
cable
to ANT-A
on
the TV back panel.
[]
Connect
two coaxial
cables
as follows:
[]
One from LOOP-OUT on the TV back panel to
ANTENNA IN on the VCR back panel.
[]
One from VCR back panel ANTENNA OUT to
ANT-B on the TV back panel.
[]
NOW complete
figure
3, steps
1-2.
Figure I. Connecting VCR with antennas or wall outlet
cable.
Cable Box
(Figure 2)
TV _ck p_BBI
[]
Connect the incoming cable to ANT-A on
the TV back panel.
[]
Connect three coaxial cables as follows:
[]
One from LOOP-OUT on the TV back
panel
to
IN on the back of the cable box.
[]
One from OUT on the back of the cable box to
ANTENNA
IN on the VCR back panel.
[]
One from ANTENNA
OUT on the VCR back
panel to ANT-B on the TV back panel.
[]
Now complete figure 3, steps 1-2.
Composite
Video with Audio or
S-Video with Audio
(Figure 3)
Figure 2. Connecting VCR with cable box.
TV
t_Ck _a_el
[]
Connect a video cable from VIDEO
OUT on the VCR back panel to VIDEO
INPUT-l,
INPUT-2 or INPUT-3 on the TV
back panel.
[]
If you have a S-VHS VCR, follow the same
steps using
the S-Video terminals on the VCR
and TV
(in place
of the
composite
terminals).
[]
Connect a set of audio cables from
AUDIO OUT on the VCR back panel to
AUDIO INPUT-l,
INPUT-2, or INPUT-3
on the TV back panel. The red cable
connects
to the R (right) channel and
the white cable connects
to the L (left)
channel.
If your VCR is mono (non-ste-
reo), connect only the white (left) cable.
Figure3.
Connecfing the VCR Audio/Video.
Hide quick links:
Advertisement
