Mitsubishi WS-73907 Owner's Manual page 16

Part I1: Installation
an Antenna, Wall Outlet Cable, or Cable Box
Separate UHF and VHF Antennas
(Figure 1)
/Ch_n_=els 2-_3} (Cha_=n_*ls _4.69)
[] Connect the UHF and VHF antenna
leads to the UHF/VHF combiner.
[] Push the combiner onto ANT-A on the
TV back panel.
[] UHF/VHF combiners are not provided
with the TV. They should be available at
most electronic stores.
Figure 1. Connecting separate UHF and VHF antennas.
Twin Lead Antenna, Coaxial Lead
Antenna, or Wall Outlet Cable
[]
[]
For antenna with twin flat leads (Figure 2)
[] Connect the 300ohm twin leads to the
transformer.
Push the 75ohm side of the transformer
onto ANT-A on the TV back panel.
300ohm to 75ohm matching transform-
ers are not provided with the TV. They
should be available at most electronic
stores.
For cable or antenna with coaxial lead (Figure 2)
[] Connect the incoming cable to ANT-A on
the TV back panel.
_0 ohm F_
optional 3o0{_P,m_o7_ ohm
TV back panel
g g**lN
Figure 2. Connecting twin lead antenna, coaxial lead
antenna, or wall outlet cable.
Cable Box
(Figure 3)
[] Connect the incoming cable to ANT-A on
the TV back panel.
[] Connect two coaxial cables as follows:
[] One from LOOP-OUT on the TV back panel to
IN on the cable box back panel.
[] One from OUT on the cable box back panel to
ANT-B on the TV back panel.
TV b_ck p_nek
[] lT
[]
Cab_ Box
Figure 3. Connecting the cable box.