Download Print this page

Appendix B: High Definition Inputs Connection Compatibility - Mitsubishi WS-73907 Owner's Manual

Hide thumbs Also See for WS-73907:

Advertisement

Appendix B: Hi h Resolution Input Connection Compatibli
Component-1
and Component-2
Inputs
These inputs are compatible with component
video signals from standard DVD players
and other equipment sending a standard
NTSC component
video signal (480i).
[]
Y
These inputs may also be compatible
with
[]
Pr
newer DVD players sending a progressive
NTSC component
video signal (480p).
[]
Pb
VGA Input
This input will accommodate
most comput-
ers capable of supporting
a VGA monitor.
The only compatible
display resolution
is
640x480.
The sync rate is 60hz.
SVGA and
XVGA resolutions
are not supported.
Input Levels and Timing with Com-
ponent Video
=l.0Vp-p
(includes sync) 75ohms
=700mVp-p,
75ohms
(can also receive
signals from outputs labeled R-Y and Cr)
=700mVp-p, 75ohms
(can also receive
signals from outputs labeled B-Y and Cb)
DTV Input
This input is compatible with most standard
DTV receivers with component video out-
puts. Compatible
DTV signals are SDTV
480i, 480p, and HDTV 1080i. All other DTV
signals, such as 720p, need to be converted
by the DTV receiver to one of the compat-
ible signal types. Please check the DTV
receiver specifications
before connecting.
This input is also compatible
with some DTV
receivers using RGB with "sync on green"
or RGB with "separate H and V sync". Com-
patible DTV signals are SDTV 480i, 480p,
and HDTV 1080i. All other DTV signals,
such as 720p, need to be converted
by the
DTV receiver to one of the compatible
signal
types.
Industry standards
for DTV RGB sig-
nals systems, synchronization,
timing, and
signal strengths
are not currently estab-
lished.
These inputs will not be compatible
with all DTV receivers that offer RGB.
If
your DTV receiver offers both DTV compo-
nent video signals and DTV RGB signals,
Mitsubishi
suggests you use the DTV com-
ponent video signals.
Please check the
DTV receiver specifications
before connect-
ing.
Input Levels and Timing When
Used With Component
Video
Signals
EIA - 770.3 Standard
Levels and Timing
[]Y
[]
Pr
[]
Pb
[]H
=l.0Vp-p
(includes sync) 75ohms
=700mVp-p,
75ohms
=700mVp-p,
75ohms
= Not Used
[]
V
=Not Used
Input Levels and Timing
When
Used
With
RGB Video
Signals
[]
G(¥) =l.0Vp-p 75ohms
(compatiblewithsyncon
green)
[]
R(Pr)
=700mVp-p,
75ohms
[]
B(Pb)=700mVp-p,
75ohms
[]
H
=4Vp-p./-l.0v, 75ohms
(when using separate H and V sync)
[]
V
=4Vp-p+/-l.0v, 75ohms
(when using separate H and V sync)

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Ws-65907Ws-55857Ws-55907Ws-65857