Quickswitch Front Panel Controller (Qs-Fpc); Redundant Power Supply (Optional) - Extron electronics Matrix 200 User Manual

Chapter 1 • Introduction to the Matrix 200
1
1
QuickSwitch™ Front Panel Controller (QS-FPC)
Redundant Power Supply
Extron • Matrix 200 • User's Manual
INPUTS
2 3 4 5 6 7 8
2 3 4 5 6 7 8
OUTPUTS
The QuickSwitch Front Panel Controller (QS-FPC) provides local control of all
Matrix 200 Switcher functions. It is supplied as an optional accessory to the
Matrix 200 and is intended for users who wish to supplement normal RS-232
computer control with local or remote operator control. Refer to Chapter 2 for
instructions on mounting the QS-FPC, and to Chapter 4 for QS-FPC operation.
The QS-FPC includes the following features:
Control Microprocessor SmartControl
microprocessor. With it, the user determines the Matrix 200 input/output
configuration, what presets are saved, as well as all other switcher settings.
Configuration Memory SmartControl can store up to eight different matrix
configurations (called presets). This can save hours of reprogramming each I/O
configuration. The QuickSwitch Front Panel Controller (QS-FPC) allows for easy
configuration of inputs and outputs, as well as the control of additional system
features.
QuickSwitch SmartControl The Front Panel's full complement of function buttons
makes setup and programming of the unit fast and easy.
The Matrix 200 can be ordered with an optional redundant (backup) power
supply to prevent signal loss if input power to the primary power supply should
suddenly be lost or interrupted.
ENTER PRESET VIEW ESC RGBS VIDEO
MATRIX SWITCHER
TM
is the Front Panel's built-in
AUD 1 AUD 2
QS - FPC
1-4