Zenith P50W26 Installation And Operating Manual page 8

External Equipment Viewing Setups
When connecting the Plasma Monitor to extema_ equipment match the colors of connecting ports (Video - yellow
Audio (L) * white, Audio (R) _red).
Connect the VIDEO iNPUT socket (yellow) with time BNC=RCA adapter to the AV INPUT on the Monitor.
if you have a mono VCR connect the audio cabl,e from the VCR to the AUDIO ([JMONO) input on the Monitor.
If you connect an S-WDEO VCR to the S*WDEO input the picture quality is improved; compared to connecting a regu _
lar VCR 1o the Video input.
Use the orbiter function to Avoid having a fixed image remain on the screen for a long period of time. Typi_lly a frozen
still picture from a VCR.
if a 4:3 picture format is used; the fixed image may remain visible on the screen=
To avoid picture noise (i_erference) leave an adequate distance between the VCR and Monitor
1. Use the INPUT SELECT button on the remote control to se[ect VIDKO
(If connected to SWIDEO, sei_ tt)e S=_IB_F_O external input source,)
2_ Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner's manual)
After subscribing to a cable TV service from a lecai provider and installing a conveder, you can watch cable TV pro-
gramming. This monitor cannot display TV programming unless a TV tuner device or cable TV converter box is connect-
ed to the Monitor.
For further information regarding cable TV service, contact your local cable TV service provider(s)
1, Use the INPUT SELECT button on the remote control and sel_ VIDEO.
2, Tune to cable service provided channets using the cable box,
Wllen connecting the monitor to an external source, match the colors of A/V input jacks on the monitor with the output
jacks on the audio/video equipment: Video = yellow, Audio (Left) = white, Audio (Right) = red.
1, Use the INPUT SELECT button on the remote contro_ to setect VIDEO,
2. Operate the corresponding extemaE equipment, See external equipment o_ratin 9 guide.
NOW to CoRRect
Connect DVD video inputs to Y_ P_ P_ of COMPONENT (DVD/DTv'
INPUT) and audio inputs to Audio sockets of AUDIO INPUT,
Now to u_
1. Turn on the DVD player, and insert a DVD.
2. Use INPUT SELECT button on the remote control to seiect COMPO-
N_T. Refer to the DVD player's manua_ for operating instructions
• Component Input ports
You can get better picture quality if you con-
nect DVD player with component input ports
as below,
Component ports of the
Monitor
Video output ports
of DVD player