Zenith P50W26 Installation And Operating Manual page 20

PIP (Picture-in-Picture)Feature
PiP lets you view 2 different inputs (sources) on your monitor screen at tt_e same time, One source will be large, and the
other source will show a smaller inset image.
When you seiect PC or DTV for main picture in PIP, you can watch VIDEO, S-VIDEO or COMPONENT 480i for sub picture_
Press the PIP button to show the sub picture,
* Press the P_P bb_ton again to turn PIP off.
Press the WIN,SIZE button and then use _11_1_ button to
dlange the sub picture size.
Press the P|P ARC button
• The sub picture appears as below.
Press the SWAP button to exchange the main and sub
pictures
[ Main Picture I Sub Picture !
Press the WIN,POSITION button
Press the _,/Y ,_II/1_ button repeatedly until desired
position is achieved. The sub picture moves
up/down/left/right
Press the SUB INPUT button to select the input source
for the sub picture.
° in RG81 and RGB2 for main picture, you can select
COMPONENT 480i, VIDEO and S-VIDEO for sub pic-
ture.
• in VIDEO and S-V_DEO for main picture, you can
select COMPONENT 480p/720p/lO80i, RGBt and
RG82 for sub picture.
° in COMPONENT 480p/720p/1080i for main picture,
you can select VIDEO and S-WDEO for sub picture.
• in COMPONENT 480i for main picture, you can select
RGa.1 and RGB2 for sub picture.
Press the ZOOM+/ZOOM- button to enlarge or reduce
the main picture size when viewing the PiE
Adjust the main pictureposition with the A/V _41 zl_
buttons in enlarged main picture mode.
20