Zenith P50W26 Installation And Operating Manual page 12

Monitor Overview
_ner's Manuat Alkaline batteries BNC-RCA adapter Remote Control
D-sub 15 pin cable Power Cord DVt Cable
Simpie Monitor Stand
Monitor Installation Options
• The Monitor can be insulted in vanous ways such such as on a wail, or on a desktop etc.
- Insta_i this monitor only in a location where a_uate ventilation is available,
' it is r_mmended that this produd only be used at an altitude of less tilan 6561 feet (_m)to get the best quality
picture and sound,
To Mount on a Wail
WaJI mount minimum allowable cbarances for
adequate ventilation
To Install on a Desktop
Pedesta_ mount minimum allowable c[ear_ces for
adequate ve ntitation
Stand installation
1. Make sure to secure the stand to the display platform
using M8 bo_s (commercially available) 1 inch (25mm)
tonger than tile thickness of the platform
3, Use the two (2) bio_s provided to attach the stand b
the monitor T_ghten each bolt securely in a cl_kwise
direction
2. Aiign the holes on the monitor and stand.
12
The memtor weigh 99.2 pounds (45kg) and
its thinness makes it unstable. Therefore,
unpacking and installation should be per-
formed by two or more per_ns.