Zenith P50W26 Installation And Operating Manual page 24

03. Aspect Ratio (Command:c) (Main picture format)
I_ To adjust the _reen format,
You can al_ adjus4 the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
SpiecJ _ menu,
Transmission
Data 0 : Wide screen(16:9)
1 : NormaI screen (4:3)
2 : Full screen (Zoom)
_cknow!edgeme_t
][c][ ][set ID][ l[OK][Datal[x]
]
Data 0 : Wide screen (16:9)
I :Normat screen (4:3)
2 : Full screen (Zoom)
Using the PC input, you select either t6:9 or 4:3 screen
aspect ratio
04. Screen Mute (Command:d)
I_ To select screen mute on/off.
Transmisden
Data i; : Screen mute on (Picture off)
0 : Screen mine off (Picture on)
Acknowledgement
Data t: : Screen mute on (Picture off)
0 : Screen mute off (Picture on)
05. Volume Mute (Command:e)
I_ To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control
Transmission
[[k][e][ ][_t ID][ l[Data][Cr] I
Data 0 : Votume mute on (Voiume off)
1 : Volume mute off (Volume on)
Acknowledgement
li ii!!se, !0H I
Data 0 : Volume mute on (Volume off)
t : Volume mute off (Volume on)
06. Volume Control (Command :f)
I_ To adjust volume.
You can also adjust votume wffh the volume buttons
on remote controt,
Transmissio_
][Set ,D][p a][Crl [
Data Min : 0 _ Max : 64
Refer to 'ReaF data mapping1' as shown dght.
Ac_nowfedgement
lif}ii ! !set !£!! I
Data Min : 0 ,_ Max : 64
24
07. Contrast (Command :g)
i_ To adjust _reen contrast
"You can also adjust contrast in the Picture menu.
Transmission
I[k][gl[ l[Set _D][ ][Data][Cr] ]
Data Min : 0 -- Max : 64
Refer to 'Re_ data mapping1' as shown below
Acknowledgement
[[91[ ][Set ID][ ][OKl[Datal[x] ]
Data Min:0-_Max:64
08, Brightness (Command:h)
I_ To adjust screen brightness,
You can also adjust brightness in the Video menu
Tr,_nsmi_;iQn
Data Min:O_Max:64
Refer to 'Reat data mapping1' as shown below.
Acknowledgement
i .1[ 1is I
Data Min:0"_Max:64
09. Color (Command:i)
I_ To adju_ the screen color
"You can aJso adjust co,or in the Video menu.
Transmis#on
I[k][i][ ][Set ID}[ ][Dalai[C4 I
Data Min:0-- Max:64
* Refer to 'Reat data mapping1' as shown below.
Acknowledgement
Data Min:0--Max:64
10, Tint (Command:j)
I_ To adjust tile screen tint,
You can also adjust tint in the Video menu.
Transmission
Data Red : 0 '_ Green : 64
* Refer to 'Real data mapping1' as shown below,
Acknowl_ement
][j] [ ][_t ID][ ][OK][Data][x] I
D_a Red : 0 _ Green : 64
0 : Step O
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
64 :Siep 100
0 :o10
5 :-9
A :-8
2D: -1
32:0
37:+1
5F: +9
64:+10